How to Flash DSP and Screen Firmware with LaserMaker

How to Flash DSP and Screen Firmware with LaserMaker

Preface: This article contains a video showing how to flash firmware by using LaserMaker. It is Mac and Windows compatible. You can connect by USB or Ethernet. This video does not cover how to connect.


    • Related Articles

    • How to Flash Screen (HMI) and Controller (DSP) Firmware on a Thunder Bolt Laser using the Screen and USB

      Preface: This article covers flashing the firmware on your Bolt, for either the Screen or the Controller. Be sure to perform this only under the guidance of Thunder Laser USA. Make sure you have stable power and have time to be at the machine. ...

    • How to Flash a Thunder Laser Ruida DSP Controller Firmware using RdWorks for Windows

      Preface: This article covers how to flash the Ruida DSP firmware using RDworksV8 over a USB Connection. You will need to install and establish the connection prior to doing a firmware flash, that is not covered in this article. Quick Start Video: ...

    • Replacing the DSP Controller

      Preface: This guide will walk you through the physical replacement of the controller. Be sure to read it completely and understand that the machine will not react like normal until the controller is configured correctly. If you attempt to use ...

    • Updating The Firmware - DO NOT DO THIS UNLESS INSTRUCTED

      DO NOT DO THIS on a Thunder Laser USA Machine UNLESS INSTRUCTED to do so by Thunder Laser USA support. If you suspect a controller error or issue, try this first: Resetting The DSP To Default Parameters, then contact support@thunderlaserusa.com. ...

    • Titan - Factory Settings Screen

      Preface: For machine firmware released after September 2025, the factory settings menu option exists and allows the user to adjust background machine functions and addons. Adjustments to the factory settings should only be done by trained ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.

      Information contained in this Knowledgebase, on this page, in this or any other  Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.