Related Articles
Dialing In Images On Acrylics - Case Study
From a client: Logo engraved on clear acrylic, with “shading” I.e. “end result looks more like grayscale” (from a color logo)....possible? Or chasing a mythical unicorn? stock 2” lens (all I’ve got) nova 24 (60watt)... I‘be tried a whole range of ...
Best Practices For Cutting/Engraving Acrylic
Acrylic is an awesome medium for C02 lasing. This article will cover the processing of acrylic. Types Of Acrylic There are 2 common variations of acrylic and while they are all chemically similar, they behave very differently from one another due to ...
Improving Job Time Estimates In LightBurn's Preview
Preface: This article covers how to upload settings to make the Lightburn Preview time more accurate and discusses some pitfalls of the preview time. What is the Job Time Estimate in the Preview: You can access the preview in Lightburn by Pressing ...
Leadshine CL1-507-3LS
1. Electrical indicators Reference number CL1-507 Minimum Typical value Max unit Continuous output current 3 - 7 A Input power supply voltage +24 36 +48 Vdc Logic input current 7 10 20 mA Pulse frequency 0 - 500 kHz Insulation resistance 100 - - MΩ ...
RotoBoss Roller Rotary Setup
Preface: This Article covers how to set up the rotary to get your steps right for a given tumbler and some best practices. This article is relevant for Thunder Laser Gantry style Lasers with Ruida Controllers. The information contained in here is not ...