D57CM31-0-S30 Motor
Related Articles
PKP544N18A2 Motor
This is used as a X axis motor for the Bolt and Odin series machines The PKP Series high-performance stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72° (500 steps per rev). DC ...PKP544MN18B Motor
This is used as a Y axis motor for the Bolt and Odin series machines. The PKP Series high-performance stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.36º (1000 steps per rev). ...X/Y Motor Adjustment And Replacement
Preface: This article covers how to swap a motor on a Thunder Laser Nova series machine. The information in this article can be used when swapping X to Y motor positions or when replacing a worn out motor with a new motor. Always disconnect the main ...573S20 Motor
Features: 3 phase 1.2° stepping angle Standard NEMA 23 dimensions Holding toque of 1.5 Nm (212 oz-in) High precision Smooth movement Low motor heating Low movement noise Specification: Step angle: 1.2 deg Step per revolution: 300 Phases: 3 No. wires: ...S&W CW-5000 Series Chiller User Manual
S&W CW-5000 Series Chiller User Manual V1 Older Model with LED's on the front use the "CW-5000_Series_User_Manua" manual attached V2 Newer Model without LED's on the front use the "CW-5000_5200Manual_NOLED" manual attached V1 5000 series with ready ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.