Corporate, Government, Education, & Industry Compliance

Thunder Laser USA has no expertise in this area. All information is for educational purposes only.

More on safety here: SAFETY INFO: C02 Laser Radiation, PPE, & Fire Suppression

More on classes here: Laser Engraver Certifications and Classes

ALL THUNDER LASER MACHINES ARE CE Certified  CLASS 2 AND COMPLETELY SAFE TO OPERATE AS LONG AS ALL DOORS ARE CLOSED AND ALL SAFETY SYSTEMS ARE IN GOOD WORKING ORDER.

And we have a Nova 35 with additional safety systems that is CE certified as a Class1 device.

Ultimately, you will need to create your own specific compliance structure and documentation following these standards (and possibly others):

THESE APPEAR TO BE THE STANDING OSHA REGULATIONS FOR LASERS:

https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.54

• OSHA Technical Manual Laser Hazards: SECTION III: CHAPTER 6
• American National Standard For Safe Use Of Lasers: ANSI Z136.1-2014
• https://en.wikipedia.org/wiki/Laser_safety

Below  are some links to example documents and information from other institutions and organizations. Much of it looks like boilerplate so templating your documentation but these examples are the property of their respective organizations so be careful not to carbon copy your materials from these examples. 

Here is some example documentation from various sources for your reference only:

• https://www.bc.edu/content/dam/files/offices/facilities/pdf/Laser%20Safety%20Manual%20FINAL%20version.pdf

• https://cws.auburn.edu/shared/files?id=227&filename=Auburn%20University%20Laser%20Safety%20Standard%20Operating%20Procedures%20Packet%20102618.pdf

• https://static.compliancetrainingonline.com/docs/industriallasersafety.pdf

• https://www.michigan.gov/documents/dleg/wsh_cetsp39_272060_7.pdf

• https://ehs.fullerton.edu/documents/forms/Laser%20Standard%20Operating%20Procedure_V4.0_12-2-2019_LL-Abby.pdf

• http://radiationsafety.utk.edu/wp-content/uploads/sites/20/2017/01/Laser-Registration-Form-Rev-2.pdf

• https://case.edu/ehs/sites/case.edu.ehs/files/2018-07/LASER-SAFETY-MANUAL_2018.pdf

• https://www.osha.gov/sites/default/files/2019-12/standard_operating_procedures.pdf

LightBurn has volume licensing for many situations as well: 

https://lightburnsoftware.com/pages/lightburn-educational-and-volume-licensing

Thunder Laser USA has no expertise in this area. All information is for educational purposes only.

• Related Articles

• Chinese Lasers and 'US Standard' Wiring Myths Dispelled

  Overview There is a lot of information and opinion floating around about many Chinese lasers and the insufficient wiring and what the 'standards' actually are. We will dive into all that and more in this article Laser Wiring 101 You probably hear ...

• SAFETY INFO: C02 Laser Radiation, PPE, & Fire Suppression

  Overview This document covers some basic safety information on the processes of laser engraving. DISCLAIMER: Laser Engravers emit deadly high voltage and laser radiation capable of causing instant blindness and tissue damage. Lasers are a fire ...

• Best Practices For Utilizing Remote Support

  This is a crash course on how to navigate the resources available as well as get your issue resolved in the most efficient, expeditious manner. Here are the best practices for getting effective support: Thunder Laser Warranty Issues If your Thunder ...

• Do You Need An FFL To Engrave Firearms?

  This document has been generated in preparation for the official US launch of our new Thunder Aurora Fiber/MOPA galvo series laser. The topic (debate) on this is vast and littered with misinformation and terrible advice. Always follow best business ...

• Iradion Eternity E30

  Iradion Manual and Datasheet