Controlling BOFA Fume Extractor With The TL Timer
BOFA
From the BOFA manual:
TL Timer Board showing where to connect the red and black from the BOFA signal cable:
Related Articles
Controlling Fume Extractors With Your Thunder Laser
Always reference the OEM manufacturers instructions, diagrams, pinouts, etc... and verify all connections. This article shows typical installations but it could vary. Filtrabox On the Filtrabox Compact X (and likely other Filtrabox units) you short ...Nova Series DSP TL Timer Manual v3
Nova Series DSP TL Timer Manual v3Thunder Nova Plus Tl Timer V8.4 Wiring Diagram aka Schematics
Preface: These are drawings for the Nova Plus series of machines as of November 2024Aurora 2.0 Series Wiring Diagram TL Timer v9.3
Aurora 2.0 Schematics: Page 1 Main power layout: Page 2 Source and AF wiring: Page 3 Source and AF wiring: Page 4 Source and AF wiring: Page 5 Source and AF wiring: Page 6 TL Timer wiring:Aurora 2.0 Series Wiring Diagram TL Timer v9.4
Here is what we currently have to the Aurora 2.0 v9.4 machines. As of 7-25-2014, only the schematics for the UV laser are published.
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.