Checking The Main Power Cord

Checking The Main Power Cord

    • Related Articles

    • Thunder Laser Main Power Requirements

      Preface: This article covers the main power requirements for your Thunder Laser. It is your responsibility to properly install a Local Code Compliant power feed for the machine. Nothing in this guide will supersede a Local Jurisdiction and you should ...
    • Corrective Action For Units Shipped With Incorrect Main Power Cord

      DANGER: DO NOT CHANGE OUT THE OUTLET. The proper corrective action is to adapt the plug that came with your laser (the incorrect one) to fit your prescribed 110VAC 20A dedicated circuit for your laser, not the other way around. We have discovered ...
    • Chiller Power Cord Intermittent Connection

      We have had reports of the chiller having power issues due to the power connection on the rear of the chiller. The plug is not seating properly and can result in intermittent, or complete, loss of chiller power. Before you assume this connection is ...
    • NOVA Main Breaker Tripped Troubleshooting Steps

      If this is a brand new machine that you had an electrician install a new 20amp outlet and you are now having power issues. Please verify with your electrician that they did not install a 220v feeder to the receptacle. Thunder Laser Main Power ...
    • NOVA series How To replace the 24VDC Controls Power Supply

      This article covers how to replace the 24V Power supply that powers the controls for your NOVA machine. Note that this was done on a NOVA35. Larger Machines like the NOVA63 will have this Power Supply by it self not hidden by the 36V power supply. ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!