Calibrating The Stock 2″ Head To The Autofocus For Nova Series

Calibrating The Stock 2″ Head To The Autofocus For Nova Series


    • Related Articles

    • Nova Series Users Manual

      For Thunder Laser USA support please email support@thunderlaserusa.com
    • Optical Autofocus Sensor Array Wiring Breakdown

      wiring diagram: https://support.thunderlaserusa.com/portal/en/kb/articles/nova-series-dsp-tl-timer-mid-2020-block-diagram-v8-3 testing z axis endstops: https://support.thunderlaserusa.com/portal/en/kb/articles/testing-z-axis-endstops
    • How to calibrate the Focal Distance on a Thunder Aurora 1.0 Pro or Aurora 2.0 Galvo Laser with Windows

      Preface: This article covers the use of the Thunder laser auto focus software and some of the basics of setting up the new Lens in EzCad3 or Lightburn. It does not cover the topic of finding the optimum focal distance. Quick Start Video: Complete ...
    • Preventing & Recovering From A Head Crash

      Why would my head crash? Well, there are many possible scenarios. We will go through a few here: Design and/or Operational Errors If certain conditions are met in the settings, design and workflow of the project the z axis could react unexpectedly. ...
    • Tuning The Focal Length on The Stock 2" Head

      This documentation is specific to the Thunder Nova series stock 2" (50.8mm) focal length lens assembly. We have typically used 6mm (1/4") as the reference for focus but it can vary. Thunder Laser actually specifies the focal distance as 4.5mm~6.5mm: ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!