Preface: This article covers a few steps that may mitigate and Error 52 when installing the Driver for your Aurora Machine. Not everyone's windows OS will have this issue, it is specific to your window OS settings/environment. If you get this message ...
Preface: This article covers installing Lightburn for your Thunder Laser Aurora Galvo laser. The Aurora series contains models with different lens options and characteristics, do not rely on the pictures to match your file naming or workspace specs ...
Preface: This article will walk you through a mock device setup so you can emulate a Thunder Laser in your Lightburn trial. In order to import the premade device profiles, you must have the proper Lighburn License (DSP or Galvo) or a trial started ...
Installing the LightBurn macro for CorelDraw. The documentation on performing this step can be found in the HELP tab inside LightBurn and attached at the end of this article. The lightburn color palette for Corel is attached at the end of this ...
Preface: This article covers the troubleshooting steps related to the error message "Hard Limit Prot" on the ruida controller screen The message on the screen: What causes this error message: The four end stop switches for X-, Y-, and Z+/- can cause ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.