Preface: This article covers how to clean your air filters for your RF Tube on your Thunder Laser Bolt and Odin Machine While performing this work, the machine should be powered off. Do not run your machine without the filters installed. Quickstart ...
This data is assuming all stock machines with proper optics/alignment/focus... etc... Nova Series The Nova series machines have DC excited watercooled glass tubes. The beam diameter in the near field is somewhere around 1/4" across SPT and Reci tubes ...
Please see the manual for the Thunder Bolt and Bolt Plus below. Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that ...
Preface: This article covers How To align your laser beam in a three mirror gantry based Bolt laser. Quick Reference Video: Complete Guide To Bolt Series Laser Alignment We recommend you sit down at a computer to read this information. It is a lot to ...
Preface: This article covers how to adjust the 48V power supply voltage for the Thunder Bolt DC 30W RF tube. Power must be on the machine and the Laser must complete the startup sequence. This procedure requires work to be done near live voltage. ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.