Bolt, Nova Plus and Odin Air Pressure Sensors Manuals and Technical Data

Preface: This article covers the Airtac and SMC air pressure sensors that were installed in and shipped on some Odin and Bolt series models. Confirm your part number on your machine.

Manuals are attached at the bottom of this article. For the most up to date versions, please see the OEM websites.

Airtac DPSN1 -0.1 to 1.0 MPA

SMC ISE20-N

• Related Articles

• Thunder Laser Bolt and Bolt Plus Unified User's Manual

  Please see the manual for the Thunder Bolt and Bolt Plus below. Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that ...

• Nova Series Users Manual

  Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that should be considered. For Thunder Laser USA support please email ...

• Why Safety Data Sheets are Important and How to Read Them

  What Is an SDS? A Safety Data Sheet (SDS) will provide info on materials regarding safety, reactivity, first-aid, and more so that you handle, process, and dispose of the material safety and according to all applicable guidance. You should always ...

• The Usual Suspects and Preparing For Your 1 Hr. Training

  Preface: The Usual Suspects are the things that most commonly get overlooked or are incorrect that can burn up training time on things that should already be checked and if not mastered. If you choose to not follow this guide you will likely ...

• SMC ISE30A-01-N-L Pressure Switch Implementation Reference

  Introduction The air assist is critical for keeping flare-ups at bay, mitigating smoke, helping keep the lens cleaner and cooler (it really shouldn't get that hot if it is in proper order anyway), and, when cutting, catalyzing the ablation of ...