Autofocus Sensor Array Accuracy Test
Related Articles
Optical Autofocus Sensor Array Wiring Breakdown
wiring diagram: https://support.thunderlaserusa.com/portal/en/kb/articles/nova-series-dsp-tl-timer-mid-2020-block-diagram-v8-3 testing z axis endstops: https://support.thunderlaserusa.com/portal/en/kb/articles/testing-z-axis-endstops
LightBurn Material Test File
Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: Thunder Material Test Lightburn Material Test ...
Legacy Lightburn Material Test File
Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: Legacy Material Test Cards Lightburn Material Test ...
How to Manually Focus
Manually Focusing Your Laser While the autofocus is convenient there are many reasons to manually focus.. In many cases it is quicker and sometimes even more accurate than using Autofocus. The following video will walk you through how to manually ...
The Machine Beeps Continuously
Problem description: You can hear a beep continuously that comes from the indicates light, even if the machine is rebooted. If the sensor tripped from a legitimate heat even, then it will need time to cool down to clear the output signal. Reasons: 1. ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email
support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form
here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.