Aurora Sino-Galvo AF2206 Scanning Head Technical Information

• Related Articles

• Aurora Series Unified User's Manual

  Please see the manuals for both Aurora series V1 and Aurora series V2 attached below Note that the manual is Windows and Ezcad centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this ...

• Aurora Installing Lightburn (non-Pro)

  Preface: This article covers installing Lightburn for your Thunder Laser Aurora Galvo laser Windows Users: Do not plug the USB cable from the machine to your computer prior to installing the Lightburn flavor of the Ezcad2 driver Lightburn Software ...

• How to calibrate the Focal Distance on a Thunder Aurora 1.0 Pro or Aurora 2.0 Galvo Laser with Windows

  Preface: This article covers the use of the Thunder laser auto focus software and some of the basics of setting up the new Lens in EzCad3 or Lightburn. It does not cover the topic of finding the optimum focal distance. Quick Start Video: Complete ...

• Thunder Galvo Lasers: The Usual Suspects and Preparing for your 1 Hour Training

  Preface: The Usual Suspects are the things that most commonly get overlooked or are incorrect that can burn up training time on things that should already be checked and if not mastered. If you choose to not follow this guide you will likely ...

• Thunder Laser Aurora Galvo Focus Height Software

  This is the software used for Aurora 2.0 machines and the Pro Aurora 1.0 machines that have Feeltek Scanning heads. You must have a Thunder Laser AF Board and not a Sino-Galvo AF board to use this software. Instructions can be found in the Aurora ...