Aurora 8 Pro Fiber 20W Mopa JPT Source User Manual

Preface: This is the OEM manual for the LASER SOURCE only, it is not the manual for the machine itself. Notes contained within this manual are from JPT and should be considered when operating your machine.

Screenshots from the manual:

Manual TOC

---

1.5 Technical Specifications:

---

Cut-off Frequency

---

Output Waveforms

• Related Articles

• Aurora Series Unified User's Manual

  Please see the manuals for both Aurora series V1 and Aurora series V2 attached below

• Thunder Laser Aurora 8 UV JPT Laser Source Manual

  This is the OEM manual for the source in the Thunder Laser Aurora UV

• Aurora 8 Fiber 60W Mopa JPT Laser Source User Manual

  Preface: This is the OEM manual for the LASER SOURCE only, it is not the manual for the machine itself. Notes contained within this manual are from JPT and should be considered when operating your machine. Screenshots from the manual: Manual TOC 1.5 ...

• ThunderBolt Unified User's Manual

  Please see the manual for the ThunderBolt below.

• Aurora Installing Lightburn (non-Pro)

  Installing and Configuring Lightburn for Galvo. Lightburn Software for Galvo is a powerful design and communication tool for your Thunder Galvo Laser. Following this guide will help you install Lightburn, install important drivers and configure ...