Aurora 8 Fiber 60W Mopa JPT Laser Source User Manual
Preface: This is the OEM manual for the LASER SOURCE only, it is not the manual for the machine itself. Notes contained within this manual are from JPT and should be considered when operating your machine.
Screenshots from the manual:
Manual TOC
1.5 Technical Specifications:
Cut-off Frequency
Output Waveforms
Related Articles
Aurora Series Unified User's Manual
Please see the manuals for both Aurora series V1 and Aurora series V2 attached below Note that the manual is Windows and Ezcad centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this ...Thunder Laser Aurora 8 UV JPT Laser Source Manual
This is the OEM manual for the source in the Thunder Laser Aurora UVAurora 8 Fiber 20W Mopa JPT Laser Source User Manual
Please see the attached.Aurora 8 Fiber 100W Mopa JPT Laser Source User Manual
Please see the attached.Aurora 8 Pro Fiber 20W Mopa JPT Source User Manual
Preface: This is the OEM manual for the LASER SOURCE only, it is not the manual for the machine itself. Notes contained within this manual are from JPT and should be considered when operating your machine. Screenshots from the manual: Manual TOC 1.5 ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.