August 2022 Changes

Add a Blow Ball to Toolbox

Upgrade with two extra crosbeam to fix the blade table

Upgrade to Si reflective mirror from Mo mirror

Upgrade to two Heat Alarm detector

• Related Articles

• July 1, 2020 Nova Series Changes

  As of 2020 July 1st, there are four changes being implemented gradually: Video Overview Z Axis Controls The Z axis up/down buttons on panels have been applied since Container#20. Chiller Main Power Some machines now are with chiller connected to ...

• Exhaust System Changes Q3 2021

  All Thunder Laser USA machines now ship with quiet inline axial inline fans and nova 51 and 63 will have 8" diameter exhaust ports. Machines shipped on containers #103 to #111 will have a mixture of old and new fans. All machines on containers #112 ...

• Z Axis Motion Control Changes

  For the Z axis, we gradually changed the Z axis motion system to only one bigger motor for Nova 35\51\63 instead of two. Because according to customers' experience, two motors on Z axis makes the motorized table out of level. And after testing, the ...

• Leadshine 573HBM20 Series EZ Servo

  We use the 573HBM20-L-1000 with driver CL1-507-3LS on newer (around May 2020) 51 and 63 models. and the 573HBM20-LS-1000 with driver HBS57-500（V2.0）on older 51 and 63, and current 35. According to Leadshine: LS motor: the motor shaft is lengthened L ...

• Miswired 24V Power Supply Causes Breaker to Trip

  This article covers a scenario that a brand new machine trips the breaker upon start up The wiring for the 24V power supply needs to be checked and corrected. Correct Wiring: Location of 24V Power Supply by Machine : Due to minor changes, the exact ...