THIS INSTRUCTION IS NOT NEEDED IF THE 4KW-120 and 4KW-85 PRESETS ARE IN LIGHTBURN.
Exports Attached
PLEASE WATCH THE VIDEO! You do not open the file once it's downloaded. IT DOES NOT ADD ANY PRESETS TO THE LIST IN LIGHTBURN. You Import it using 'import camera profile' in the cam control window. Once it's imported the lens calibration part is finished. Then move right to the camera alignment.
HOVER OVER THE ATTACHMENTS TO READ THE ENTIRE FILE NAME AND FOV:
You will need some material, measuring tools and some decent settings to score your material of choice. This procedure assumes that the lens is in focus. You will need some skills in running the machine. Pay attention to the line segment numbers when ...
Preface: This article covers how to determine which lens you have installed on your Aurora Fiber Laser Visual Marking: Look for the F-### on the lens. It should be either F-160,F170, F-210, F-220, F-254 or F-290. For additional information, please ...
If you recently purchased a new ThunderCam kit, you should follow the instructions here instead: ThunderCAM Installation Manual Its a good idea to tape it up first and view it before you stick it down permanently. The Cable connector on the camera ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.