426 - Setting Comp Test

426 - Setting Comp Test

    • Related Articles

    • LightBurn Material Test File

      Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: Thunder Material Test Lightburn Material Test ...

    • Legacy Lightburn Material Test File

      Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: Legacy Material Test Cards Lightburn Material Test ...

    • Laser User Origin Not Setting Correctly

      Preface: When using the Start From in Lightburn set to "User Origin", you should be able to set an Origin on the machine as your statrting position and test with a Frame operation. To set the Origin on the machine, you jog the laser head to where you ...

    • Nova Plus Ramp Test and setting Autofocus Height for best engraving results

      Preface: This article will cover the steps to perform a ramp test to be able to set the autofocus height and the length of the manual focus tool. For this procedure, it is assumed that you are already connected to the machine and ready to run. This ...

    • Thunder Bolt Ramp test and setting Autofocus Height for best engraving results

      Preface: This article will cover the steps to perform a ramp test to be able to set the autofocus height and the length of the manual focus tool. For this procedure, it is assumed that you are already connected to the machine and ready to run. This ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.

      Information contained in this Knowledgebase, on this page, in this or any other  Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.