425CM03-LN and 425CM03-SZ-LN 5 Phase Stepper Motor Information

Preface: This is the information that we currently have for the 5 Phase Stepper motors that are used on the Bolt Series machines (Depending on the year of manufacturer, your model may have a different model, be sure to check the sticker)

• Related Articles

• 3DM580S 3 Phase Stepper Driver Technical Information

  Preface: This is a collection of data for the Driver. The DM series consists of stepper drives adopting Leadshine latest advanced stepper control technology. Those stepper drives are highly reliable with good performance and highly competitive cost. ...

• PKP544N18A2 Motor

  This is used as a X axis motor for the Bolt and Odin series machines The PKP Series high-performance stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72° (500 steps per rev). DC ...

• PKP544MN18B Motor

  This is used as a Y axis motor for the Bolt and Odin series machines. The PKP Series high-performance stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.36º (1000 steps per rev). ...

• X/Y Motor Adjustment And Replacement

  Preface: This article covers how to swap a motor on a Thunder Laser Nova series machine. The information in this article can be used when swapping X to Y motor positions or when replacing a worn out motor with a new motor. Always disconnect the main ...

• 573S20 Motor

  Features: 3 phase 1.2° stepping angle Standard NEMA 23 dimensions Holding toque of 1.5 Nm (212 oz-in) High precision Smooth movement Low motor heating Low movement noise Specification: Step angle: 1.2 deg Step per revolution: 300 Phases: 3 No. wires: ...